16 Ibhokisi yokuSasaza iiFayibha kwiiPorts
Iimfuno zokusingqongileyo
●UHlelo olungangenwa ngamanzi: IP55
●Ubushushu: -40℃～+60℃
●Ukufuma: ≤95% (+40℃)
●Uxinzelelo lwe-atmospheric: 70KPa～108 KPa
●Ubungakanani bebhokisi: 205 (H）×180 (W) ×50 (D) mm
Umsebenzi
●Ukusetyenziswa kwangaphakathi koyilo lwesakhiwo se-single-layer, esahlulwe kwindawo yokusabalalisa i-optical, ukuqaliswa kwentambo yangaphandle, i-welding esisigxina kunye ne-butterfly-shaped cable coiled storage.Imigca ye-Fiber optic icacile, musa ukuphazamisana nomnye, ukuququzelela umsebenzi wokwakha kunye nokugcina emva kokugcinwa.
●Kukho imingxunya emibini yokungena ngentambo emazantsiyebhokisi.Inokwaziswa iintambo ezimbini zangaphandle kunye nentambo yebhabhathane ezisibhozo.Ukuhlangabezana ngokuthe ngqo okanye ukwahluka koqhagamshelo lwentambo yefiber optic yangaphandle kunye noqhagamshelo lwentambo yebhabhathane.
●Iidiski ezidibeneyo zinokuthi ziqwalaselwe kunye ne-8-core okanye i-12-core umthamo ukuhlangabezana nomthamo wokwandiswa kwekhabhinethi.
●Ukufakwa kweFlange ukuhlangabezana ne-8-core.
●Iyunithi esisigxina yefiber optic emile njengebhabhathane enekhadi slot isakhiwo, inokuodolwa kunye nokubeka intambo yefiber optic emise okwebhabhathane.
●Umzimba webhokisi unokugcinwa malunga ne-1 meter butterfly cable, ngokusebenzisa umsesane wocingo kwibhokisi yokusasazwa ngocwangco, kunye nokuqinisekisa ukuba irediyasi yokugoba ≥ 30mm.
Imiyalelo yokufakela
Ukufakela: ifakwe eludongeni
1. Faka imingxuma emine eludongeni ngokomgama phakathi kwemingxuma yokunyuka kwe-backplane kunye nomkhono wokwandisa iplastiki.
2. Lungisa i-case eludongeni nge-M8 × 40 screws.
3. Faka umngxuma wokumisa ophezulu webhokisi kumngxuma wodonga, kwaye ulungise ibhokisi eludongeni nge-M8 × 40 screw ngebhokisi phantsi komngxuma webhokisi.
4. khangela ukufakwa kwekhabhinethi, ufanelekile ukuvala umnyango.Ukuthintela imvula ekungeneni kwikhabhinethi, qinisa i-cylinder yokutshixa ngesitshixo.
5. Yazisa intambo yangaphandle kunye nentambo yebhabhathane ngokweemfuno zokwakha.
Ukufakwa kwepali
1. Ukususa iKhabhinethi Ukunyusela ipleyiti yangasemva kunye nehupula, khulula i-harness kwi-mounting plate.
2. Khusela i-backplane kwiipali ngehupula.Ukuze uthintele iingozi, kufuneka ujonge ipali yokutshixa ihulaphu, eqinileyo kwaye ethembekileyo, akukho kukhulula.
3. Ukufakwa kwebhokisi kunye nokufakwa kwe-fiber-optic cable kunye nokusabalalisa 3.1.3,3.1.4.
4. Vula ikhabhinethi
5. Umnwe ophakathi ungavulwa ngokutsala i-fastener ngokuqinileyo ngaphandle, kwaye isigqubuthelo esisezantsi sinokunyanzeliswa ngamandla angaphantsi komnwe.
| Into | Inkcazo | Ubungakanani |
| Ibhokisi | GF-B-8D | Iqhekeza eli-1 |
| Ubushushu bushwabana imikhono | Ф1.5×60mm | 8 iziqwenga |
| ityhubhu ekhuselayo | Φ5 | 0.5m |
| Izibophelelo zeentambo zenayiloni | 3×100mm | Iziqwenga ezi-4 |
| Iibholithi zokwandiswa | M8×40mm | 4 iiseti |
| isitshixo |
| Iqhekeza eli-1 |
